Ashish Auto



Centrifugal Jet Self Priming Pump Set - CJS Series




We offer Centrifugal Jet Self Priming Pump Set - CJS Series that features pump casing and ejector unit, which are designed carefully to give the best possible hydraulic efficiency and suction lift characteristics. Sealing is by means of a bellow mechanical seal made of carbon & ceramic is fitted over the shaft, which is ground to close tolerance. Most modern and highly sophisticated machinery and technology are employed in the manufacturing of these pump sets using quality raw materials, dynamically balanced impellers and rotors to ensure long life. These pump sets are powered by a totally enclosed fan cooled and AC induction motor is suitable for continuous duty. Motor stator is made of low watt loss steel laminations assembled under pressure and rigidly locked in the frame.

Dynamically balanced rotor of our Centrifugal Jet Self Priming Pump Set - CJS Series ensures vibrations and noise free operations as well as increases the life of bearing and seal. The varnish impregnated windings made of enameled copper wire offer excellent resistance. Shaft is made of quality steel, precision ground of sample size for transmitting the rated Horse Power. Construction of motor frame and usage of quality materials result in high performance and low temperature rise thereby increasing the life cycle of the motor. T.O.P (motor protector) is incorporated in all single-phase motors. All single-phase pump sets require an adequate motor protection control panel.

Applications :

  • Shallow well
  • Houses
  • Small farms
  • Domestic pressure boosting
  • Gardens
  • Small industries
  • Drinking Water supply


Salient Features :

  • High operating efficiency resulting in lower power consumption
  • Good Suction lift characteristics
  • Dynamically balanced rotating parts including rotor and impeller
  • Balanced and rigid construction
  • Back Pull-out design for easy servicing & repair
  • Single shaft ensures permanent & correct alignment
  • Inbuilt thermal over load protector in all single-phase pump sets


Pumped Liquids : Clean, thin, non-aggressive, non explosive, clear, cold, fresh water without abrasives, solid particles or fiber having the following characteristics.



Technical Specifications

Power Range 0.37kW – 0.75Kw (0.5 HP – 1.0 HP)
Speed 2880 RPM
Versions Single-Phase 220-240, V 50Hz,AC supply (Permanent spilt Capacitor – PSC)
Maximum total head Upto 45 m
Maximum flow rate Upto 1.1 mps (4 m3/hr)
Degree of protection IP 54
Directions of rotation Clockwise viewed from driving end
Class of insulation B
Maximum Suction Lift 9 m
Type of duty S1 (Continuous)
Nominal pumpset size in mm 25x25

Characteristics of Clear Cold Water

Maximum liquid temperature 33 oC
Permissible amount of sand 25 gm/m3 (max.)
Chloride ion density 500 ppm (max.)
Allowable solids 3000 ppm (max.)
Specific Gravity 1
Hardness (Drinking water) 300
Viscosity 1.75 x 105 m2/sec
Turbidity 50 ppm silica scale
PH Value 6.5 to 8.5

Material of Construction of Pump

Part Name Material
Rear cover / Bracket Cast Iron
Motor frame Aluminium
Shaft SS AISI 410
Impeller Cast iron
Pump casing Cast iron
Sealing Mechanical seal (Carbon & ceramic)