Ashish Auto



CRI Borewell Submersible Pump (100 MM)




C.R.I. 100mm (3") Submersible pumpsets are built with thermoplastic impellers, diffusers and inbuilt check valve. All vital components of these pumpsets are made of corrosion resistant thermoplastic and the shaft is of SS 304/410. Pumpsets are multistage centrifugal type. The optimal design of impellers and diffusers enables the best possible hydraulic efficiency.

The pumpset is firmly coupled to a submersible electric motor which operates submerged beneath the surface of water. Built-in chek valve prevents back flow and reduces the risk of water hammering. All mounting dimension of 100 mm (4") pumpsets and motors upto 2 HP are in accordance with Nema standard.

Applications :

  • Domestic And municipal water supply
  • Rural water Supply
  • Irriagation
  • Sprinkler system
  • Pressure baosting units and fire fighting system
  • Industrial and mining application
  • Fountains
  • Ponds and Gardens


Salient Features :

  • More Longevity & Hygiene
  • High operating efficiency
  • Floating impeller design prevents blockage
  • Easy to dismantle & repair
  • Rigid Construction
  • Highly durable
  • Can handle up thrust load
  • Nema mounting standard upto 2.0 Hp
  • Extremely hardwearing water lubricated bearing.


Pumped Liquids : Clean, thin, non-aggressive, non-explosive, clear, cold, fresh water without abrasives, solid particles or fibre having the following characteristics.



Specifications

Power range 0.37kW – 5.5 kW (0.5HP – 7.5HP)
Speed 2880 rpm
Version Single Phase, 200 – 240V, Three Phase, 380 – 415V, 50 Hz, A.C. Supply
Maximum total head 400 m
Maximum flow rate 25.2 m3/h
Maximum outer diameter in mm 98
Nominal outlet size in inches 32, 40, 50 & 65
Degree of Protection IP 58.
Direction of Rotation Clockwise from driving end.
Thrust Load 1500 lbs.
Minimum cooling flow along the motor 0.15 m/sec
Type of duty S1 (Continuous)
Method of starting Direct on Line, Capacitor Start Capacitor Run (CSCR) / Permanent split Capacitor (CSR)
Maximum starts per hour 12 times.
Mounting Standard As per NEMA

Technical Specifications

MATERIAL OF CONSTRUCTION OF PUMP
Part Name Nominal Dia 100 mm(4")
Check Valve housing CI
Check Valve Seat Nitrile Butyle Rubber
Outer Shell SS 304
Impeller Noryl / Delrin
Diffuser Chamber Noryl
Suction Inter Connector Cast Iron
Stop Ring SS 304 / Hylem
Intermediate Bearing (Sleeve/Bush) SS 304 / NBR
Cable Guard SS 304
Suction Inter connector Cast Iron
MATERIAL OF CONSTRUCITON OF MOTOR
Shaft Seal Nitrile Butyle Rubber
Stator Shell Stainless Steel 304
Thrust pad graphite carbon
Thrust Base SS 420
Diaphragm Nitrile Butyle Rubber
Motor base Cast Iron
Shaft SS 410/ 431